HP Presario CQ62-a00 Compaq Presario CQ62 Notebook PC and HP G62 Notebook PC - - Page 61
RTC battery, outlet and then disconnecting the AC adapter from the computer.
View all HP Presario CQ62-a00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
6. Remove the module (2) by pulling it away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. RTC battery Description RTC battery Spare part number 606015-001 Before removing the RTC battery: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). Remove the RTC battery: 1. Unplug the RTC battery from the system board (1). 2. Use a sharp, non-conductive, tool to release the RTC battery from the adhesive material that secures the RTC battery to the system board.. Component replacement procedures 51