HP Presario CQ62-a00 Compaq Presario CQ62 Notebook PC and HP G62 Notebook PC - - Page 72
TouchPad button board, Turn the top cover upside down with the front toward you.
View all HP Presario CQ62-a00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
TouchPad button board Description Touchpad button board (includes bracket and cable) Spare part number 606005-001 Before removing the TouchPad button board: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the following components: a. Hard drive (see Hard drive on page 43) b. Optical drive (see Optical drive on page 46) c. Keyboard (see Keyboard on page 53) d. Top cover (see Top cover on page 56) Remove the TouchPad button board: 1. Turn the top cover upside down with the front toward you. 2. Remove the four Phillips PM2.0×3.0 screws (1) that secure the TouchPad bracket to the top cover. 3. Lift up and remove the TouchPad button board bracket (2). The TouchPad button is fused on the TouchPad button board bracket. Reverse the above procedure to reassemble and install the TouchPad button board. 62 Chapter 4 Removal and replacement procedures