HP Presario SR1800 Getting Started Guide - Compaq Presario PC - Page 29
Connecting 5.1 (5 speakers and a subwoofer) audio speakers
View all HP Presario SR1800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
6 Turn on the PC. NOTE: Always turn on the PC before you turn on the speaker system. 7 Plug in the speaker system power. 8 Turn on the speaker system. 9 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: • Type 3 connectors: See "Configuring audio output with Multi-channel Sound Manager" on page 31. • Type 6 connectors: See "Configuring audio output with Sound Effect Manager" on page 33. The following diagram shows a typical 4.1 audio installation: OUT IN Connecting 5.1 (5 speakers and a subwoofer) audio speakers To connect two front speakers, two rear speakers, a center speaker, and a subwoofer for six-channel (5.1 speaker) output: 1 Turn off the PC. 2 Connect the front speaker cable to the lime green Audio Line Out connector that matches the back of your PC. 3 6 S OUT • Type 3 is three connectors • Type 6 is six connectors • Type S is a sound card connector Configuring Speaker and Sound Options 21