HP Pro 3385 Micro Maintenance & Service Guide Pro 3330/3380 Microtower Pro - Page 108
System Board
View all HP Pro 3385 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
System Board NOTE: All system board spare part kits include replacement thermal material. Description System board for use in 3330/3380 models System board for use in 3330 models with NetClone System board for use in 3330 models with Windows 8 with no Digital Product Key (DPK) System board for use in 3330 models with Windows 8 Standard System board for use in 3330 models with Windows 8 Professional System board for use in 3340/3348 models System board for use in 3340/3348 models with NetClone System board for use in 3340/3348 models with Windows 8 with no Digital Product Key (DPK) System board for use in 3340/3348 models with Windows 8 Standard System board for use in 3340/3348 models with Windows 8 Professional System board for use in 3335/3385 models System board for use in 3335/3385 models with NetClone Spare part number 663099-001 711493-001 702644-001 702644-501 702644-601 663100-001 711494-001 702645-001 702645-501 702645-601 663101-001 707247-001 When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules ● Processor ● Expansion cards To remove the system board: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 48). 2. Remove the access panel (Access Panel on page 49). 3. Lay the computer on its side with the rear facing toward you. 4. Remove the front bezel (Front Bezel on page 51). 5. Remove an expansion cards (Expansion Cards on page 59). 6. Disconnect the power, and data cables from the back of all installed drives. 7. Disconnect all cables from the system board. 8. Remove the six screws that secure the system board to the chassis. 98 Chapter 7 Removal and Replacement Procedures - Microtower (MT) Chassis