HP Pro 3385 Micro Maintenance & Service Guide Pro 3330/3380 Microtower Pro - Page 148
Preparation for Disassembly, on Access Panel, Memory, Expansion Card, Fan Sink, Processor
View all HP Pro 3385 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
System Board NOTE: All system board spare part kits include replacement thermal material. Description System board for use in models without Windows 8 System board for use in models with NetClone System board for use in models with Windows 8 with no Digital Product Key (DPK) System board for use in models with Windows 8 Standard System board for use in models with Windows 8 Professional Spare part number 663099-001 711493-001 702644-001 702644-501 702644-601 The system board is secured to the computer with six screws. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 101). 2. Remove the access panel (Access Panel on page 102). 3. When replacing the system board, make sure the following components are removed from the defective system board and installed on the replacement system board: ● Memory modules (seeMemory on page 105) ● Expansion cards (Expansion Card on page 110) ● Heat sink (Fan Sink on page 131) ● Processor (Processor on page 133) 4. Remove the fan from the chassis (Fan Assembly on page 129). 5. Rotate the drive cage to its upright position. 6. Rotate the power supply to its full upright position. 7. Disconnect all data and power cables from the system board. 8. Disconnect the balance of the cables from the system board. 9. Remove the six screws that secure the system board to the chassis. 138 Chapter 8 Removal and Replacement Procedures - Small Form Factor (SFF) Chassis