HP Pro All-in-One 3520 Maintenance & Service Guide HP Pro 3520 All-in-One - Page 141
ME Firmware Version should be, Management Engine ME BIOS Extensions
View all HP Pro All-in-One 3520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Control panel message Description Recommended action 2201-MEBx Module did not checksum correctly Memory error during POST execution of the 1. Management Engine (ME) BIOS Extensions option ROM. 2. Reboot the computer. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 2202-PMM Deallocation Error during MEBx cleanup Memory error during POST execution of the 1. Management Engine (ME) BIOS Extensions option ROM. 2. Reboot the computer. Unplug the power cord, re-seat the memory modules, and reboot the computer. 3. If the memory configuration was recently changed, unplug the power cord, restore the original memory configuration, and reboot the computer. 4. If the error persists, replace the system board. 2211-Memory not configured correctly for proper MEBx execution SODIMM1 is not installed. Make sure there is a memory module in the SODIMM1 socket and that it is properly seated. 2212-USB Key Provisioning failure writing to USB device used for USB key provisioning device will not allow BIOS to update provision file properly. 1. Try a different USB key device for provisioning. 2. If the error persists, update to the latest BIOS version and ME firmware version. 3. If the error still persists, replace the system board. 2217-ME Firmware Version request failure ME firmware is not properly responding to BIOS query for version information. 1. Reboot the computer. 2. If the error persists, update to the latest BIOS version and ME firmware version. 3. If the error still persists, replace the system board. 2218-ME Firmware Version should be updated ME firmware must be updated to match 1. Update to the latest ME firmware current functionality contained in the system version. BIOS. 2. If the error persists and system BIOS has been recently updated, restore previous system BIOS version. 3. If the error still persists, replace the system board. POST Numeric Codes and Text Messages 133