HP ProDesk 400 G5 Micro Hardware Reference Guide - Page 31
Press the release lever on the back of the drive 1
![]() |
View all HP ProDesk 400 G5 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3. Disconnect the power cable (1) and data cable (2) from the rear of the optical drive. IMPORTANT: When removing the cables, pull the tab or connector instead of the cable itself to avoid damaging the cable. 4. Press the release lever on the back of the drive (1), and then slide the drive through the front bezel (2). Removing and installing drives 23
![](/manual_guide/products/hewlettpackard-prodesk-400-g5-micro-hardware-reference-guide-b3576b1/31.png)
3.
Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.
IMPORTANT:
When removing the cables, pull the tab or connector instead of the cable itself to avoid
damaging the cable.
4.
Press the release lever on the back of the drive (1), and then slide the drive through the front bezel (2).
Removing and installing drives
23