HP ProDesk 400 G5 Micro Hardware Reference Guide - Page 34
Removing a 3.5-inch hard drive, Remove the computer access panel. See
![]() |
View all HP ProDesk 400 G5 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
11. Reconnect the power cord and any external devices, and then turn on the computer. 12. Lock any security devices that were disengaged when the access panel was removed. Removing a 3.5-inch hard drive NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. 1. Prepare the computer for disassembly. See Preparing for disassembly on page 6. 2. Remove the computer access panel. See Removing the computer access panel on page 8. 3. Disconnect the power cable (1) and data cable (2) from the rear of the hard drive. 26 Chapter 2 Hardware upgrades
![](/manual_guide/products/hewlettpackard-prodesk-400-g5-micro-hardware-reference-guide-b3576b1/34.png)
11.
Reconnect the power cord and any external devices, and then turn on the computer.
12.
Lock any security devices that were disengaged when the access panel was removed.
Removing a 3.5-inch hard drive
NOTE:
Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you
can transfer the data to the new hard drive.
1.
Prepare the computer for disassembly. See
Preparing for disassembly
on page
6
.
2.
Remove the computer access panel. See
Removing the computer access panel
on page
8
.
3.
Disconnect the power cable (1) and data cable (2) from the rear of the hard drive.
26
Chapter 2
Hardware upgrades