HP ProDesk 400 G5 Micro Hardware Reference Guide - Page 37
Installing a 2.5-inch hard drive
View all HP ProDesk 400 G5 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. Disconnect the power cable (1) and data cable (2) from the rear of the hard drive. 4. Remove the three 6-32 mounting screws (1) and slide the drive out of the bay (2). Installing a 2.5-inch hard drive 1. Prepare the computer for disassembly. See Preparing for disassembly on page 6. 2. Remove the computer access panel. See Removing the computer access panel on page 8. Removing and installing drives 29
3.
Disconnect the power cable (1) and data cable (2) from the rear of the hard drive.
4.
Remove the three 6-32 mounting screws (1) and slide the drive out of the bay (2).
Installing a 2.5-inch hard drive
1.
Prepare the computer for disassembly. See
Preparing for disassembly
on page
6
.
2.
Remove the computer access panel. See
Removing the computer access panel
on page
8
.
Removing and installing drives
29