HP ProDesk 400 G5 Micro Hardware Reference Guide - Page 48

Appendix A, Type 3

Page 48 highlights

b. To insert the new battery, slide one edge of the replacement battery under the lip of the holder (1) with the positive side up. Push the other edge down until the clamp snaps over the other edge of the battery (2). Type 3 a. Pull back on the clip (1) that is holding the battery in place, and remove the battery (2). b. Insert the new battery and position the clip back into place. NOTE: After the battery has been replaced, use the following steps to complete this procedure. 5. Replace the computer access panel. 6. Reconnect the power cord and any external devices, and then turn on the computer. 40 Appendix A Battery replacement

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

b.
To insert the new battery, slide one edge of the replacement battery under the lip of the holder (1)
with the positive side up. Push the other edge down until the clamp snaps over the other edge of
the battery (2).
Type 3
a.
Pull back on the clip (1) that is holding the battery in place, and remove the battery (2).
b.
Insert the new battery and position the clip back into place.
NOTE:
After the battery has been replaced, use the following steps to complete this procedure.
5.
Replace the computer access panel.
6.
Reconnect the power cord and any external devices, and then turn on the computer.
40
Appendix A
Battery replacement