HP ProLiant 2500 Compaq ProLiant Cluster HA/F100 and HA/F200 Administrator Gui - Page 160
Expanding Capacity
View all HP ProLiant 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
B-8 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Shortcut method Following is a shortcut method to change a path from Active to Standby: 1. Highlight the Active path you want to change. 2. Click the right mouse button to display a pop-up menu. 3. Select Set As Standby from the menu. The selected Active path will change to Standby when you select Apply Changes or close Redundancy Manager. Expanding Capacity Redundancy Manager does not support the hot-add of logical drives. To add drives, you must: 1. Physically add the drives to the RA4000. 2. Reboot Windows NT on the server to see the new drives. Shut down and reboot the server. 3. Run the Array Configuration Utility to configure the drives. NOTE: You cannot increase the capacity of an existing Windows NT drive volume, but you can assign a new drive letter to the extra capacity furnished by the added drives. 4. Run Windows NT Disk Administrator to assign a drive letter to the newly created, unused capacity of your RAID volume. 5. While still running Disk Administrator, format the drives using Microsoft NTFS. 6. Run Redundancy Manager.