HP ProLiant BL495c HP ProLiant BL495c Generation 5 Server Blade User Guide - Page 12
Remove the server blade, Remove the access panel
View all HP ProLiant BL495c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
• Use the enclosure GUI to initiate a shutdown: a. Select the Enclosure Information tab, then select the Overall checkbox in the Device Bays item. b. Initiate a shutdown from the Virtual Power menu: - Select Momentary Press to initiate a controlled shutdown of applications and the OS. - Select Press and Hold to initiate an emergency shutdown of applications and the OS. IMPORTANT: When the server blade are in standby mode, auxiliary power is still being provided. To remove all power from the server blade, remove the server blade from the enclosure. After initiating a virtual power down command, be sure that the server blade go into standby mode by observing that the system power LED is amber. Remove the server blade To remove the component: 1. Identify the proper server blade. 2. Power down the server blade (on page 11). 3. Remove the server blade. 4. Place the server blade on a flat, level work surface. Remove the access panel To remove the component: 1. Power down the server blade (on page 11). 2. Remove the server blade (on page 12). 3. Press the access panel release button. 4. Slide the access panel towards the rear of the server blade, and then lift to remove the panel. Operations 12