HP ProLiant DL170h HP ProLiant DL170h G6 Server Software Configuration Guide - Page 28
Boot Menu, Table 19, Filed, Description, Options, Field
View all HP ProLiant DL170h manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Table 19 Power Configuration submenu fields Filed Description Allows processor cores to run faster than marked frequency in specific condition. Options Enabled NOTE: Turbo Mode is currently only available on certain high-bin Intel processors. It improves performance with a minor penalty to power efficiency. It requires that Intel Enhanced Speedstep also be Enabled. Boot Menu Figure 23 Boot Menu Table 20 Boot menu fields Field Description Boot Device Priority Use this screen to specify the order in which the system checks for the device to boot from. To access this screen, select Boot Device priority on the Boot setup screen and press . The Boot Device Priority screen is displayed. USB Device Boot Priority BIOS Setup option (when set to "Low") to disallow newly inserted USB devices from automatically showing up as top priority within their device class in the standard boot order list. This is needed so that the user can configure the BIOS to avoid attempting to boot nonbootable USB devices that are left plugged into the server during POST. The default value is High. Embedded NIC Port 1 PXE The option specifies the embedded NIC Port1 PXE, Allows the user to Enable or Disable of any embedded NIC Ports. Should be one SETUP option for each embedded NIC Port. The default setting is Enabled. Embedded NIC Port 2 PXE The option specifies the embedded NIC Port2 PXE. Allows the user to Enable or Disable of any embedded NIC Ports. Should be one SETUP option for each embedded NIC Port. The default setting is Disabled. 28