HP ProLiant DL590/64 Deployment of Red Hat Linux 7.2 for Itanium Processor on - Page 4

Deployment of Red Hat Linux 7.2 for Itanium™ Processor on ProLiant DL590/64 Servers 4 Default Hardware Configurations Table 1 lists the default configurations of the ProLiant DL590/64 server models available for purchase. Table 1. ProLiant DL590/64 default configurations Configuration 1 Configuration 2 Processors 2 x 733 MHz/2 MB (4 proc sockets) 2 x 800 MHz/4 MB (4 proc sockets) Memory Boards 1 memory board (32 DIMM sockets) 2 memory boards (64 DIMM sockets) (64 DIMM socket capable with optional second memory board) SDRAM Memory Expansion1 1 GB (4 x 256 MB) Multiples of 4 C100 v1.2 CL2 up to 32 GB 4 GB (8 x 512 MB) Multiples of 4 C100 v1.2 CL2 up to 64 GB Hard Drives Optional Optional Power Supply 1 (support for 3) 2 (support for 3) System Power Module 1 (support for 3) 2 (support for 3) Redundant Hot Plug Fans Standard Standard Network Interface Dual Port 10/100 Dual Port 10/100 RAID Controller Embedded Embedded LS-120 Standard Standard CD - ROM Standard Standard Form Factor 7U Rack 7U Rack 1 Memory for the ProLiant DL590/64 must meet very tight specifications due to timing requirements of the memory support chipset used in the server. All memory used within the ProLiant DL590/64 must conform to those exact specifications. For this reason, Compaq does not support transferring memory modules from other non-Itanium platforms into the ProLiant DL590/64. Supported Software All Compaq support software and drivers that are supported for use on the ProLiant DL590/64 server are included in the Red Hat Linux 7.2 for Itanium Processor operating system, which may be ordered online at www.redhat.com/software/linux/7-2_itanium.html. Future updates to Compaq support software will be provided for download at www.compaq.com/support/files/server/us/locOsCat/70.html. 16S6-0502A-WWEN