Home » HP Manuals » Servers » HP ProLiant SL4545 » Manual Viewer

HP ProLiant SL4545 HP Scripting Toolkit 9.30 for Windows User Guide - Page 38

OnlineSpare, Logical Drive category, ArrayAccelerator, LogicalDrive, LogicalDriveSSPState

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

OnlineSpare The value for this option determines whether the array specified previously in the script will be configured with spare drives. Method mode Custom Possible values Default value To specify exactly which drives to use as spares, In Configure action mode: None. use the applicable convention (port:ID, box:bay, or port:box:bay). In Reconfigure action mode, ACU ignores any value entered for this option and keeps any spares To specify only the number of spares (not the that are already present in the configuration. exact IDs), enter that number as the value for this option. ACU automatically selects only those drives that are suitable for the array. To specify that the array should not have spares, enter None. Auto Yes (indicating one spare) No In Configure action mode: Yes (indicating one spare). In Reconfigure action mode, ACU ignores any value entered for this option and keeps any spares that are already present in the configuration. Logical Drive category The Logical Drive category has the following options: • "ArrayAccelerator" (page 38) • "LogicalDrive" (page 38) • "LogicalDriveSSPState" (page 38) • "ParityGroups" (page 39) • "PreferredPath" (page 39) • "RAID" (page 39) • "Sectors" (page 39) • "Size" (page 39) • "SSPAdaptersWithAccess" (page 40) • "StripeSize" (page 40) ArrayAccelerator This option specifies whether the array accelerator is enabled or disabled for the specified logical drive. The default value is Enabled. LogicalDrive The value that you enter for this option specifies the ID number of the logical drive that is to be created or modified. The first logical drive on an array must have an ID of 1 (not 0), and logical drive numbering must be contiguous. • In Configure action mode, ACU accepts only the ID number of the next possible logical drive. • In Reconfigure action mode, ACU also accepts the ID number of any existing logical drive. LogicalDriveSSPState This option is valid only for controllers that enable SSP on a logical drive basis. Other controllers that support SSP use the SSPState option (page 36). 38 Scripting Toolkit utilities

Section	Page
HP Scripting Toolkit for Windows User Guide	1
Contents	3
1 Introduction	6
Scripting Toolkit for Windows	6
Microsoft Windows Preinstallation Environment	6
Minimum requirements	6
2 Deployment using the Scripting Toolkit for Windows	7
Deployment overview	7
Sample deployment procedure	7
Creating a network share	8
Adding drivers to Windows PE 3.0	8
Adding drivers to Windows PE 4.0	9
Capturing a reference configuration from the source server	10
Configuring the target server and installing the operating system	11
3 Advanced topics	12
Overview	12
Customizing deployment scripts using HPDISCOVERY and IFHW	12
Querying the HPDISCOVERY file based on system name	12
Querying the HPDISCOVERY file to determine the presence of a particular card	12
Querying the HPDISCOVERY file to determine the presence of a card family	13
Booting Windows PE from a USB drive key	13
Flashing the ROM in a Windows PE environment	13
Erasing array configurations	15
4 Scripting Toolkit utilities	16
Syntax conventions	16
Utility online help	16
Using Scripting Toolkit utilities	16
Using REBOOT	17
REBOOT command-line syntax	17
REBOOT command-line arguments	17
REBOOT return codes	17
REBOOT command-line examples	17
Using SETBOOTORDER	18
SETBOOTORDER command-line syntax	18
SETBOOTORDER command-line arguments	18
SETBOOTORDER return codes	18
SETBOOTORDER command-line examples	18
Using STATEMGR	18
STATEMGR command-line syntax	18
STATEMGR command-line arguments	19
STATEMGR return codes	19
STATEMGR command-line examples	19
Using RBSURESET	19
RBSURESET command-line syntax	19
RBSURESET command-line arguments	19
RBSURESET return codes	20
Using HPDISCOVERY	20
HPDISCOVERY command-line syntax	20
HPDISCOVERY command line arguments	20
HPDISCOVERY return codes	21
HPDISCOVERY command line examples	21
Using IFHW	21
IFHW command-line syntax	21
IFHW command-line arguments	21
IFHW return codes	21
IFHW command line examples	22
Expression operators and terms	22
Expression examples	22
Using HWQUERY	23
HWQUERY command-line syntax	23
HWQUERY command line arguments	23
HWQUERY return codes	23
HWQUERY command-line examples	23
Using CONREP	24
CONREP command-line syntax	24
CONREP command line arguments	25
CONREP return codes	25
CONREP screen output	25
CONREP -s (Store to Data file) Example usage for HP ProLiant servers not using the Oxx ROM family	26
CONREP –l (Load from Data file) Example usage for HP ProLiant servers not using the Oxx ROM family	26
CONREP Data File Sample Contents for HP ProLiant servers not using the Oxx ROM family	26
CONREP command file contents	27
Using HPRCU	28
HPRCU command-line syntax	28
HPRCU command line arguments	28
HPRCU return codes	29
HPRCU sample XML format	29
Using HPACUSCRIPTING	29
Capturing a configuration	30
Using an Input script	30
Creating an ACU script file	31
Sample custom input script	31
Script file options	32
Control category	33
Action mode	34
Method mode	34
Controller category	34
Controller	34
ChassisName	35
ClearConfigurationWithDataLoss	35
LicenseKey, DeleteLicenseKey	35
PreferredPathMode	35
ReadCache, WriteCache	35
RebuildPriority, ExpandPriority	36
SSPState	36
SurfaceScanDelay	36
Video performance options	36
Array category	37
Array	37
Drive	37
DriveType	37
OnlineSpare	38
Logical Drive category	38
ArrayAccelerator	38
LogicalDrive	38
LogicalDriveSSPState	38
ParityGroups	39
PreferredPath	39
RAID	39
Sectors	39
Size	39
SSPAdaptersWithAccess	40
StripeSize	40
HBA category	40
ConnectionName	40
HBA_WW_ID	41
HostMode	41
ACU scripting error messages	41
Using HPLPCFG	45
HPLPCFG command-line syntax	45
HPLPCFG command-line arguments	45
HPLPCFG return codes	45
HPLPCFG command-line examples	46
Using LO100CFG	46
LO100CFG command-line syntax	46
LO100CFG command-line arguments	47
LO100CFG return codes	47
LO100CFG command-file contents	47
Using HPQLAREP	48
HPQLAREP command-line syntax	48
HPQLAREP command-line arguments	48
HPQLAREP return codes	49
HPQLAREP command-line examples	49
Using HPONCFG	50
HPONCFG command-line syntax	50
HPONCFG command-line arguments	50
HPONCFG return codes	51
HPONCFG command file contents	51
Obtaining an entire configuration	51
Obtaining a specific configuration	52
Setting a configuration	53
HPONCFG command-line examples	53
5 Troubleshooting	54
Troubleshooting table	54
6 Support and other resources	55
Information to collect before contacting HP	55
How to contact HP	55
Subscription service	55
Related information	55
Scripting Toolkit support	55
Typographic conventions	56
HP Insight Remote Support software	56
7 Documentation feedback	58
Acronyms and abbreviations	59

Match case Limit results 1 per page

OnlineSpare

The value for this option determines whether the array specified previously in the script will be

configured with spare drives.

Default value

Possible values

Method mode

In Configure action mode: None.

To specify exactly which drives to use as spares,

use the applicable convention (port:ID, box:bay,

or port:box:bay).

Custom

In Reconfigure action mode, ACU ignores any

value entered for this option and keeps any spares

that are already present in the configuration.

To specify only the number of spares (not the

exact IDs), enter that number as the value for this

option. ACU automatically selects only those

drives that are suitable for the array.

To specify that the array should not have spares,

enter

None

In Configure action mode: Yes (indicating one

spare).

Yes (indicating one spare)

Auto

In Reconfigure action mode, ACU ignores any

value entered for this option and keeps any spares

that are already present in the configuration.

Logical Drive category

The Logical Drive category has the following options:

•

“ArrayAccelerator” (page 38)

•

“LogicalDrive” (page 38)

•

“LogicalDriveSSPState” (page 38)

•

“ParityGroups” (page 39)

•

“PreferredPath” (page 39)

•

“RAID” (page 39)

•

“Sectors” (page 39)

•

“Size” (page 39)

•

“SSPAdaptersWithAccess” (page 40)

•

“StripeSize” (page 40)

ArrayAccelerator

This option specifies whether the array accelerator is enabled or disabled for the specified logical

drive. The default value is Enabled.

LogicalDrive

The value that you enter for this option specifies the ID number of the logical drive that is to be

created or modified. The first logical drive on an array must have an ID of 1 (not 0), and logical

drive numbering must be contiguous.

•

In Configure action mode, ACU accepts only the ID number of the next possible logical drive.

•

In Reconfigure action mode, ACU also accepts the ID number of any existing logical drive.

LogicalDriveSSPState

This option is valid only for controllers that enable SSP on a logical drive basis. Other controllers

that support SSP use the SSPState option

(page 36)

Scripting Toolkit utilities