HP ProLiant SL4545 HP Scripting Toolkit 9.30 for Windows User Guide - Page 42

Error code Error message Comment or clarification between operations. Limit the number of such configuration changes in the script. 1091 Controller does not support SSP. - 1093 Controller requires physical drives to set - license keys. 1102 Slot information is not available. You cannot run a script in Input mode on internal controllers that do not have slot information online. Systems running Microsoft Windows must have the System Management Driver loaded. 1110 Controller does not support license keys. - 1111 Invalid license key. - 1112 Controller has maximum number of license - keys. 1114 Controller requires non-failed physical - drives to set license keys. 2564 Controller is locked by another machine or - user. 2818 Invalid Method. The scripted Method value is not valid. 2819 Invalid Controller. The scripted controller does not match any existing controllers. 2820 Could not detect controller . - 2821 No controllers detected. This error applies to Input mode only. If no controllers are detected in Capture mode, the capture file is empty. 2822 Invalid read cache/write cache ratio. The specified cache ratio is not supported by either the controller or the current controller configuration. 2823 Invalid rebuild priority. - 2824 Invalid expand priority. This error message appears if the expand priority value specified in the script is not supported. This message also appears if expansion is not possible because the Expand Priority feature is then not supported. Expansion might be temporarily unavailable on a controller that normally supports expansion if, for example, the cache battery has low charge, another expansion or migration is already in progress, or the array has the maximum supported number of physical drives. 2825 Invalid array. The array ID is invalid. 2826 Array not specified. The script file has commands that require an array, but no array is specified. 2827 New array ID does not match the next available array ID. The scripted array ID is not the next ID in sequence, based on the IDs of the existing arrays. For example, only array A exists and the script file specifies creation of array C (omitting array B). 2828 New array ID already exists. This error occurs in Configure mode when the array ID specified in the script file already exists in the configuration. In Configure mode, you can create only new arrays. 2829 Cannot create array. The controller has no unassigned physical drives, or it already has the maximum number of arrays or logical drives. 2830 Cannot expand array. The controller does not support expansion, or the current controller configuration is not expandable. 42 Scripting Toolkit utilities