HP Professional ap550 Compaq Professional Workstation AP550 Hardware Reference - Page 40
Installing and Removing an AGP Graphics Controller, installing a full-length expansion board
View all HP Professional ap550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing and Removing an AGP Graphics Controller To install the AGP graphics controller, remove the metal slot screw and cover, insert the board into the AGP slot, and press the board firmly into place. Replace the metal slot screw. See the section, Installing an Expansion Board, in this chapter for more information. To ensure the board fits properly, use an AGP graphics controller with an ATX format bracket. When installing an AGP graphics controller, press firmly on the board so that the whole connector seats properly in the AGP slot. If you are installing a full-length expansion board, be sure to engage the card guide. Installing an AGP graphics controller To remove the AGP graphics controller, remove the metal slot screw, hold the board at each end, and then pull up. Be sure to replace the metal slot screw and cover. See the section, Removing an Expansion Board, in this chapter for more information. Compaq Professional Workstation AP550 Hardware Reference Guide 2-25