HP Professional ap550 Compaq Professional Workstation AP550 Hardware Reference - Page 65
Using SCSI, with SCSI Devices, Con View Host Adapter Settings
View all HP Professional ap550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
.ive-device SCSI cable with terminator The cable that shipped with your workstation may look different than the one illustrated (a five-device cable). ✎ If installing a narrow SCSI device, you will need to attach a 68-pin to 50-pin SCSI adapter. .or additional information about installing optional SCSI devices, refer to the documentation included with the device option kit or contact your Compaq authorized dealer, reseller, or service provider. Using SCSISelect with SCSI Devices The Wide Ultra2 SCSI host adapter includes the SCSISelect utility to configure the host adapter and to run SCSI disk utilities. To run the SCSISelect utility: s In Post Messages Enabled mode: Press Ctrl+A when the Press for SCSISelect Utility message appears during POST. s In Post Messages Disabled mode: When the Compaq logo screen appears, press any key to exit the logo screen. Immediately after exiting the logo screen, press Ctrl+A to access the SCSISelect utility. A menu appears with the following options: s Configure/View Host Adapter Settings ❏ SCSI Bus Interface Definitions Host Adapter SCSI ID SCSI Parity Checking Host Adapter SCSI Termination Hardware Reference Guide C-5