HP Professional ap550 Compaq Professional Workstation AP550 Hardware Reference - Page 9
Changing from a Minitower to a Desktop Configuration
View all HP Professional ap550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Changing from a Minitower to a Desktop Configuration To change from a minitower to a desktop configuration: 1. Turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet and the back of the workstation, and then disconnect the network cable from the system. 3. Remove the workstation access panel. Refer to the instructions Removing the Workstation Access Panel in Chapter 2. 4. Remove the front bezel. Refer to Removing the .ront Bezel in Chapter 2. 5. Disconnect all power and data cables from the drives in the 5.25-inch drive bay. 6. To release a drive from the 5.25-inch drive bay, slide the drivelock as shown. Carefully push the drive from the back of the unit until the drive casing can be grasped. Releasing the drives with the drivelock CAUTION: Do not hold the faceplate while removing a drive. Only hold a drive by its casing. Compaq Professional Workstation AP550 Hardware Reference Guide 1-5