HP Q3715A HP Color LaserJet 5550 series - User Guide - Page 178
SYSTEM IS FULL, Event Log Empty
View all HP Q3715A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Control panel messages (continued) Control panel message Description Recommended action DISK IS WRITE PROTECTED To clear press alternates with Ready The file system device is protected and no new files can be written to it. 1. To enable writing to the disk, turn off write protection, using HP Web Jetadmin. 2. To clear the message, press the key. 3. If the message persists, turn the printer off and then back on. EIO DISK X NOT FUNCTIONAL For help press The EIO disk in slot X is not working correctly. 1. Turn the printer off. 2. Remove the EIO disk from the slot indicated and replace with a new EIO disk drive. EIO X disk initializing The EIO disk device in slot X is initializing. No action necessary. EIO X disk spinning up The EIO disk device in slot X is spinning No action necessary. up its platter. Event Log Empty SHOW EVENT LOG was selected from the control panel, and the event log is empty. No action necessary. FLASH DEVICE FAILURE To clear press alternates with Ready A device failure has occurred on the specified drive. Printing may continue for jobs that do not require the Flash DIMM. 1. To clear the message, press the key. 2. If the message persists, remove and re-install the EIO disk drive. 3. Turn the printer back on. 4. If the message still persists, replace the Flash DIMM. FLASH FILE OPERATION FAILED To clear press alternates with Ready The printer received a PJL file system command that attempted to perform an illogical operation (for example, to download a file to a non-existent directory). 1. To clear the message, press the key. 2. If the message persists, turn the printer off and then back on. 3. If the message reappears, there may be a problem with the software application. FLASH FILE SYSTEM IS FULL To clear press alternates with Ready The printer received a PJL file system command that attempted to store something on the file system but was unsuccessful because the file system is full. 1. Use HP Web Jetadmin software to delete files from the Flash Memory and try again. 2. To clear the message, press the key. 3. If the message persists, turn the printer off and then back on. 164 Chapter 8 Problemsolving ENWW