HP Scanjet 4890 User's Manual - Page 15
Scan negatives — HP Scanjet 4890, Scan negatives, HP Scanjet 4850
View all HP Scanjet 4890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 1 Scan negatives - HP Scanjet 4890 The transparent materials adapter (TMA) is built into the scanner lid. Slides, negatives, and medium- and large-format film have their own unique media holders called "templates." The templates are rectangular frames that you can use to optimally place your media for scanning. Before you begin! Check the model number on the scanner lid. The steps below are for the HP Scanjet 4890. If you are using an HP Scanjet 4850, see Scan negatives - HP Scanjet 4850. 1. Open the scanner lid. 2. Remove the TMA cover by releasing the latch and pulling the cover up and toward you. 3. Place the negatives into the appropriate template. Note Negatives are easily damaged. Touch them only on their edges. - Place 35 mm negative frames in the negatives template. Start at the top and fill in rows with the negative strips. - Place medium-format or large-format film strips in the large-format template. 12 HP Scanjet 4800 series