HP Scitex FB500 HP Scitex FB500 and FB700 Printer Series - User Cleaning Instr - Page 15
CAUTION, Lubricate behind the top area of the rail where the carriage wheels contact.
View all HP Scitex FB500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4. Lubricate the top carriage-wheel strip from end to end on the rail (moving the carriage to clean the full length of the rail). The included oiled rags can be reused until there is no clear surface remaining on the rag (rags should be replaced quarterly). Clean these surfaces weekly or more frequently, depending on the amount of debris in the environment. CAUTION: Do not add additional oil to the lubrication cloths. The cloths are created to distribute a very thin film of oil. If too much oil is deposited, oil pockets can cause friction with the carriage wheels, which will produce output anomalies. Figure 13 Top carriage-wheel strip 5. Lubricate behind the top area of the rail where the carriage wheels contact. Figure 14 Back of top carriage-wheel strip 6. Using a lint-free cloth and Printhead Flush, clean the lower carriage-wheel strip from end to end on the rail (moving the carriage to clean the full length of the rail). ENWW Clean and lubricate rail strips (bi-weekly) 13