HP Server tc2120 Microsoft Windows Server 2003 .NET - Install Procedures v1.51 - Page 1

8 Installing Microsoft Windows Server 2003 This chapter is a supplement to the HP Server tc2120 Network Operating System Installation Guide (HP part number 312977-001) that came with your server and provides instructions for installing Microsoft Windows Server 2003 (formerly known as "Windows .NET"). High Level Process Flow ?? Perform Windows Server 2003 Server Installation. ?? Completing the Installation (HP drivers, Recovery Console). ?? Configure the System. ?? Configure the Network. ?? Additional HP accessories. Prepare the Installation Please refer to the Chapter 1 "Preparing your HP Server tc2120 for your NOS installation" for our recommendations on server preparation. Then gather the following material: ?? HP Server tc2120 Startup CD ?? Microsoft Windows Server 2003 CD-ROM. ?? Up to three blank, formatted 3.5-inch diskettes ?? Two or more clients for testing purpose (Optional) NOTE Disable SCSI Support Before Using ATA RAID Controller if present. Due to system resource limitations, the Promise FastTrak100 TX2 IDE RAID controller is not compatible with systems having SCSI capabilities. (The ATA and SCSI functionality cannot operate simultaneously). You must disable SCSI support in Setup before you can use the RAID controller. To disable SCSI support, follow these steps: 1. Remo ve any installed SCSI HBA cards from the PCI slots. 1