HP Spectre 15-bl000 Maintenance and Service Guide - Page 45
Solid-state drive, Remove the power connector and USB/audio board cable see
View all HP Spectre 15-bl000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Solid-state drive Solid-state drive spare part kits include replacement rubber feet. Description 2-TB, PCIe solid-state drive (for use in models with 8th generation Intel Core processors) 1-TB, PCIe solid-state drive 512-GB, PCIe solid-state drive 360-GB, PCIe solid-state drive 256-GB, PCIe solid-state drive Spare part number 941661-001 913015-001 913014-001 920299-001 913013-001 IMPORTANT: To remove the solid-state drive, you have to remove the power connector and USB/audio board cable. Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 22). 5. Disconnect the battery cable from the system board (see Battery on page 23). CAUTION: To prevent damage to internal components, be sure to disconnect the battery cable from the system board before removing the solid-state drive. You do not need to remove the battery to remove the solid-state drive. 6. Remove the power connector and USB/audio board cable (see USB/audio/power connector board on page 36). Remove the solid-state drive: 1. Remove the PM2.0×2.9 screw (1) that secures the solid-state drive to the bottom cover. (The solid-state drive tilts up.) 2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the solid-state drive. Solid-state drive 39