HP Spectre XT 13-2200 HP SpectreXT Maintenance and Service Guide - Page 39

Battery, Remove the 3 Phillips PM 2×2 screws

Get HP Spectre XT 13-2200 PDF manuals and user guides View all HP Spectre XT 13-2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Battery Description 4-cell, 45WHr 3.05AH Li-ion battery Spare part number 685989-001 Before removing the battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 29). Remove the battery: 1. Turn the computer right-side up, with the front toward you. 2. Disconnect the battery cable. 3. Remove the 3 Phillips PM 2×2 screws (1) that secure the battery to the top cover. Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Battery
Description
Spare part number
4-cell, 45WHr 3.05AH Li-ion battery
685989-001
Before removing the battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
Base enclosure
on page
29
).
Remove the battery:
1.
Turn the computer right-side up, with the front toward you.
2.
Disconnect the battery cable.
3.
Remove the 3 Phillips PM 2×2 screws
(1)
that secure the battery to the top cover.
Component replacement procedures
31