HP Spectre XT 13-2200 HP SpectreXT Maintenance and Service Guide - Page 46
Remove the RJ-45 module cover
View all HP Spectre XT 13-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Before removing the RJ-45 module cover: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 29). 5. Disconnect the battery cable (see Battery on page 31). Remove the RJ-45 module cover: 1. Remove the 2 Phillips PM screws securing the RJ-45 module cover (1). 2. Remove the cover (2). 38 Chapter 4 Removal and replacement procedures
Before removing the RJ-45 module cover:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
Base enclosure
on page
29
).
5.
Disconnect the battery cable (see
Battery
on page
31
).
Remove the RJ-45 module cover:
1.
Remove the 2 Phillips PM screws securing the RJ-45 module cover
(1)
.
2.
Remove the cover
(2)
.
38
Chapter 4
Removal and replacement procedures