HP Spectre x360 Spectre x360 Convertible PC model numbers 13-4000 through 4099 - Page 40
Solid-state drive
View all HP Spectre x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Reverse this procedure to install the WLAN module. Solid-state drive Description For use on all computer models: 512-GB, M2, SATA3 solid-state drive supporting TLC 256-GB, M2, SATA3 solid-state drive supporting TLC 128-GB, M2, SATA3 solid-state drive supporting TLC For use only on HP Spectre Pro x360 Convertible PC computer models: 256-GB, M2, SATA3 SED solid-state drive supporting MLC 180-GB, M2, SATA3 solid-state drive supporting MLC 128-GB, M2, SATA3 solid-state drive supporting MLC Spare part number 801504-001 801503-001 801502-001 813147-001 808446-001 813146-001 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 29). Remove the solid-state drive: 1. Remove the PM2.0×2.9 screw (1) that secures the solid-state drive to the bottom cover. (The solidstate drive tilts up.) 32 Chapter 5 Removal and replacement procedures