HP Spectre x360 Spectre x360 Convertible PC model numbers 13-4000 through 4099 - Page 48
Disconnect the speaker cables, to which the keyboard backlight cable is attached, and then
View all HP Spectre x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
● WLAN module (see WLAN module on page 30) ● Solid-state drive (see Solid-state drive on page 32) ● Heat sink (see Heat sink on page 42) Remove the system board: 1. Release the ZIF connector (1) to which the audio jack cable is attached, and then disconnect the audio jack cable from the system board. 2. Disconnect the WLAN antenna cables (2) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled "1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2". 3. Release the ZIF connector (3) to which the display panel cable is attached, and then disconnect the display panel cable from the system board. 4. Disconnect the power connector cable (4) from the system board. 5. Disconnect the speaker cables (1) from the system board. 6. Release the ZIF connector (2) to which the keyboard backlight cable is attached, and then disconnect the keyboard backlight cable from the system board. 7. Release the ZIF connector (3) to which the keyboard cable is attached, and then disconnect the keyboard cable from the system board. 8. Release the ZIF connector (4) to which the TouchPad cable is attached, and then disconnect the TouchPad cable from the system board. 40 Chapter 5 Removal and replacement procedures