HP Spectre x360 Spectre x360 Convertible PC model numbers 13-4000 through 4099 - Page 50
Heat sink
View all HP Spectre x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description Spare part number For use only on computer models equipped with an Intel Core i-7 6550U, Intel Core i-7 6500U, or Intel Core i-5 6200U processor 828819-001 For use only on computer models equipped with an Intel Core i-7 5600U, Intel Core i-7 5500U, Intel Core 801494-001 i-5 5300U, or Intel Core i-5 5200U processor Before removing the heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28), and then remove the following components: a. Remove the battery (see Battery on page 29). b. Remove the fan (see Fan on page 33). c. Remove the system board (see System board on page 38). Remove the heat sink: 1. Loosen the four captive Phillips PM2.0×2.7 screws (1) that secure the heat sink to the system board. NOTE: Due to the adhesive quality of the thermal material located between the heat sink and system board components, it may be necessary to move the heat sink from side to side to detach it. 2. Remove the heat sink (2). 42 Chapter 5 Removal and replacement procedures