HP StorageWorks 1606 Brocade Converged Enhanced Ethernet Administrator's Guide - Page 75
STP, RSTP, and MSTP configuration guidelines and restrictions, Default STP, RSTP, and MSTP
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
STP, RSTP, and MSTP configuration guidelines and restrictions 5 5. Map a VLAN to an MSTP instance using the instance command. For more details see "Mapping a VLAN to an MSTP instance" on page 61. switch(conf-mstp)#instance 1 vlan 2, 3 switch(conf-mstp)#instance 2 vlan 4-6 switch(conf-mstp)#instance 1 priority 4096 6. Specify the maximum hops for a BPDU to prevent the messages from looping indefinitely on the interface using the max-hops hop_count command. For more details see "Specifying the maximum number of hops for a BPDU (MSTP)" on page 62. switch(conf-mstp)#max-hops 25 7. Enter the copy command to save the running-config file to the startup-config file. switch(conf-mstp)#exit switch(config)#end switch#copy running-config startup-config For more information on MSTP, see "STP, RSTP, and MSTP configuration and management" on page 57. STP, RSTP, and MSTP configuration guidelines and restrictions Follow these configuration guidelines and restrictions when configuring STP, RSTP, and MSTP: • You have to disable one form of xSTP before enabling another. • LAGs are treated as normal links and by default are enabled for STP. • You can have 16 MSTP instances and one MSTP region. • Create VLANs before mapping them to MSTP instances. • The MSTP force-version option is not supported. • For load balancing across redundant paths in the network to work, all VLAN-to-instance mapping assignments must match; otherwise, all traffic flows on a single link. • When you enable MSTP by using the global protocol spanning-tree mstp command, RSTP is automatically enabled. • For two or more switches to be in the same MSTP region, they must have the same VLAN-to-instance map, the same configuration revision number, and the same name. • Spanning Tree topologies must not be enabled on any direct server connections to the front-end Ten Gigabit Ethernet ports that may run FCoE traffic. This may result in lost or dropped FCoE logins. Default STP, RSTP, and MSTP configuration Table 8 lists the default STP, RSTP, and MSTP configuration. TABLE 8 Default STP, RSTP, and MSTP configuration Parameter Default setting Spanning-tree mode Bridge priority By default, STP, RSTP, and MSTP are disabled 32768 Converged Enhanced Ethernet Administrator's Guide 55 53-1001346-01