HP StorageWorks 1606 Brocade Converged Enhanced Ethernet Administrator's Guide - Page 89
Disabling spanning tree, command to enable spanning tree on the CEE interface.
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Configuring STP, RSTP, or MSTP on CEE interface ports 5 To enable spanning tree on the CEE interface, perform the following steps from Privileged EXEC mode. 1. Enter the configure terminal command to enter global configuration mode. 2. Enter the interface command to specify the CEE interface type and slot/port number. switch(config)#interface tengigabitethernet 0/1 3. Enter the no shutdown command to enable the CEE interface. 4. Enter the spanning-tree command to enable spanning tree on the CEE interface. switch(conf-if-te-0/1)#no spanning-tree shutdown Disabling spanning tree From the CEE interface, use this command to disable spanning tree on the CEE interface. By default, spanning tree is disabled. To enable spanning tree on the CEE interface, perform the following steps from Privileged EXEC mode. 1. Enter the configure terminal command to enter global configuration mode. 2. Enter the interface command to specify the CEE interface type and slot/port number. switch(config)#interface tengigabitethernet 0/1 3. Enter the no shutdown command to enable the CEE interface. 4. Enter the spanning-tree command to enable spanning tree on the CEE interface. switch(conf-if-te-0/1)#spanning-tree shutdown Converged Enhanced Ethernet Administrator's Guide 69 53-1001346-01