HP StorageWorks 1606 HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359
HP StorageWorks 1606 - Extension SAN Switch Manual
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 1606 manual content summary:
- HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 1
HP StorageWorks Fabric OS 6.3.0a release notes Part number: 5697-0359 Third edition: March 2010 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 2
Legal and notice information © Copyright 2009-2010 Hewlett-Packard Development Company, L.P. © Copyright 2009-2010 Brocade Communications Systems, Incorporated - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 3
; 10-GbE ports require 10-GbE B-series SFPs.) • HP StorageWorks 1606 Extension SAN Switch, the next-generation distance extension platform for FCIP applications, supports 16 FC ports at 1, 2, 4, and 8 Gb/s, and 6 1-GbE optical ports. (The user can select either a copper or optical interface on two - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 4
• Key vault credentials support for HP Secure Key Manager (SKM) • HA clustered key vault support for HP SKM • FICON enhancements: Blade-based port swaps NOTE: See the B-series FICON Connectivity Stream for information on specific versions of Fabric OS supported for FICON. • Native connectivity - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 5
are configured to support FCIP. Fabric OS 6.3.0 and later supports up to 20 FCIP tunnels on a DC SAN Director Multi-protocol Extension Blade, and 8 FCIP tunnels on the 1606 Extension SAN Switch. The FCIP tunnels ports remain online. The new master HP StorageWorks Fabric OS 6.3.0a release notes 5 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 6
or 3 can now participate in M-EOS fabrics using nondefault DID Base Offset settings. NOTE: See the HP StorageWorks Merging Fabrics Based on M-Series and B-Series Fibre Channel Switches Application Notes for specific information on what HP supports for B-series and M-series interop fabrics. CEE/FCoE - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 7
all 8-Gb platforms. • Integrated Routing license-Allows ports on a DC SAN Backbone Director, DC04 SAN Director, 1606 Extension SAN Switch, HP StorageWorks 8/80 SAN Switch, or HP StorageWorks 8/40 SAN Switch to be configured as EX_Ports, supporting FCR. This eliminates the need to add a Bseries Multi - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 8
-specific traffic flows can be configured, prioritized, and optimized throughout the data center infrastructure. • 1606 Extension SAN Switch Port Upgrade-This new license allows a 1606 Extension SAN Switch to enable 16 FC ports (instead of the base 4 ports) and 6 GbE ports (instead of the base - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 9
of Service Prioritization Switch and DC SAN Director Switch 10/24 FCoE Blade: • IEEE 802.1Qbb, Priority-based Flow Control • IEEE 802.1Qaz, Enhanced Transmission Selection • IEEE 802.1, DCB Capability Exchange Protocol (Proposed under the DCB Task Group of IEEE 802.1 Working Group) HP StorageWorks - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 10
SFPs, and 10-GbE ports require 10-GbE B-series SFPs. • 1606 Extension SAN Switch-Next-generation distance extension platform for FCIP applications. Supports 16 FC ports at 1, 2, 4, and 8 Gb/s, and 6 1-GbE optical ports. (The user can select either a copper or optical interface on two ports.) GbE - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 11
8-Gb SAN Switch for HP BladeSystem c-Class (Brocade 5480) • HP StorageWorks 1606 Extension SAN Switch (Brocade 7800) • HP StorageWorks 2408 FCoE Converged Network Switch (Brocade 8000) • HP StorageWorks DC SAN Director Switch 10/24 FCoE Blade (Brocade FCOE10-24) • HP StorageWorks DC SAN Director - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 12
Switch for HP c-Class BladeSystem (Brocade 4024) • HP StorageWorks 8/80 SAN Switch • HP StorageWorks DC SAN Backbone Director • HP StorageWorks DC04 SAN Director • HP StorageWorks 400 Multi-protocol Router • HP StorageWorks EVA4400 Embedded Switch Module • HP StorageWorks 1606 Extension SAN Switch - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 13
the base Fabric OS HP website: http://www.hp.com IMPORTANT: The Fabric OS versions listed in the Earliest compatible version column in Table 1 are the earliest versions supported by HP for connection to switches running Fabric OS 6.3.0a at the time of the Fabric OS 6.3.0a release. HP StorageWorks - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 14
support ended December 2007) N/A HP StorageWorks MSA SAN Switch 2/8 3.2.1c 3.2.1c1,6,7 HP StorageWorks Core Switch 2/64 HP StorageWorks SAN Director 2/128 in Chassis 5.0.5e Config modes 3 and 4 only 5.0.5f6,7 HP StorageWorks SAN Switch 2/8V HP StorageWorks SAN Switch 2/16V HP StorageWorks SAN - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 15
6.3.0a HP StorageWorks 8/8 SAN Switch HP StorageWorks 8/24 SAN Switch HP StorageWorks 8/40 SAN Switch HP StorageWorks 8/80 SAN Switch 6.1.0f 6.3.0a5 HP StorageWorks Encryption SAN Switch 6.2.0b 6.3.0a HP StorageWorks 1606 Extension SAN Switch (Brocade 7800) 6.3.0 HP StorageWorks 2408 FCoE - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 16
not be used with XPath or Fabric OS-based routing (FCR) for connections to the same edge fabric. 9 When attempting to use HP StorageWorks Fabric Manager (FM) v5.5 and lower with Fabric OS (FOS) v6.1.1 and higher, users may encounter problems with Zoning, Performance monitoring, SYSLOG configuration - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 17
requires Fabric OS 6.2.0a or later, and supports up to four blades. FS8-18 (DC Switch Encryption FC blade) Supported with Fabric OS 6.2.0b or later, with a maximum of four blades of this type on the DC SAN Backbone Director or DC04 SAN Director HP StorageWorks Fabric OS 6.3.0a release notes 17 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 18
Director blade Number of blades FX8-24 (DC SAN Director Multi-protocol Extension Blade) FCOE10-24 (DC SAN Director Switch 10/24 FCoE Blade) Supported with Fabric OS 6.3.0x, with a maximum of two blades per director. The DC SAN Director Switch 10/24 FCoE Blade can be installed in the same chassis - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 19
Director with these blades. Fibre Channel Routing scalability For the latest information about Fibre Channel Routing (FCR) scalability support, see the HP StorageWorks SAN design reference guide, available at: http://www.hp.com/go/sandesignguide HP StorageWorks Fabric OS 6.3.0a release notes 19 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 20
in this release, that is, the earliest supported software versions that interoperate. HP recommends using the latest software versions to get the greatest benefit from the SAN. When using the new Virtual Fabrics (VF) feature, HP recommends that all switches participating in a fabric with a logical - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 21
Gb platforms must operate with Fabric OS 6.1.0f, 6.1.1b, or later. • M-EOS-based platforms must operate with M-EOS 9.8.1 or later for McDATA Fabric Mode (in- teropmode and TCP graphs support tool tips only for the first enabled TCP connection graph. HP StorageWorks Fabric OS 6.3.0a release notes 21 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 22
with M-EOS-based products. All HP StorageWorks models supported by Fabric OS 6.3.0x support both interopmodes 2 and 3, with the exception of the 4/32 SAN Switch, 2408 FCoE Converged Network Switch, and DC SAN Backbone Director or DC04 SAN Director with one or more DC SAN Director Switch 10/24 FCoE - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 23
Service FCIP (VE_Ports) IPFC (IP over FC) M-EOS ALPA 0x13 configuration VE_Port to VEX_Port Integrated Routing9 Domain Offset Support 239 Domain Support (available on Mi10K only) Masterless F_Port Trunking (AG connect to Fabric OS switches Yes Yes HP StorageWorks Fabric OS 6.3.0a release notes 23 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 24
based switches. 3DPS is supported outbound from Fabric OS-based switches. M-EOS can provide reciprocal load balancing using Open Trunking. 4SCC policies are supported only in conjunction with L2 Fabric Binding. 5Not supported of supported migration paths. The DC04 SAN Director cannot be downgraded - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 25
SAN Switch cannot be downgraded to a version earlier than Fabric OS 6.2.0b. If there are multiple node encryption groups (EGs) in a fabric, complete the firmware download on one node at a time before downloading on another node. Firmware upgrade instructions IMPORTANT: HP recommends that users - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 26
Switch/DC SAN Director Multi-protocol Extension Blade and another 1606 Extension SAN Switch/DC SAN Director Multiprotocol Extension Blade. FCIP tunnels are not supported between the 1606 Extension SAN Switch/DC SAN Director Multi-protocol Extension Blade and the previous generation HP StorageWorks - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 27
of a link. • The 1606 Extension SAN Switch and DC SAN Director Multi-protocol Extension Blade cannot receive a ping from an external device (for example, a Windows PC). • Latency measurements supported on FCIP tunnels (tested limit under Fabric OS 6.3.0): HP StorageWorks Fabric OS 6.3.0a release - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 28
time and 0.1% loss • The 1606 Extension SAN Switch supports optical and copper media types on GE0 and GE1 interfaces. Copper media is the default on GE0/GE1 ports and does not support autosense functions. FCoE/CEE (2408 FCoE Converged Network Switch and DC SAN Director Switch 10/24 FCoE Blade) • The - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 29
in a fabric that uses these features. • VF is not supported on the 1606 Extension SAN switch. • VF-dedicated ISLs are supported on the DC SAN Director Switch Multiprotocol Extension Blade. XISLs are not supported. • On an HP StorageWorks 8/40 SAN switch with Virtual Fabrics enabled, ports may be re - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 30
switches. • Flow-based QoS is not supported on any 8-Gb Fibre Channel blades in the 4/256 SAN Director. • Any products that cannot operate with Fabric OS 6.0 cannot exist in a fabric with flow-based QoS. Major problems to this firmware release, if users want to enable the Adaptive Networking - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 31
OS 6.0 or later. If any switches are running Fabric OS 5.x or earlier, only manual distribution can be used. • Fabric OS 6.0 or later allows FCS Automatic Distribution only when in strict mode, requiring only switches with Fabric OS 6.0 or later. HP StorageWorks Fabric OS 6.3.0a release notes 31 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 32
may cause evm errors, so each new switch should be isolated from supported on the 1606 Extension SAN Switch. 10G interoperability 10G interoperability between the HP StorageWorks SAN Director 6 Port 10Gb FC Blade and McDATA blades is not supported due to a hardware limitation. However, the SAN - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 33
fences the port. Extensive testing has shown that ports in the process of going offline may exhibit bursts of errors. Waiting the supported on Extended Fabrics E_Port when it is configured to use IDLE primitives. The user must disable the buffer-to-buffer credit recovery feature HP StorageWorks - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 34
When connecting to an extension device that does not support ARB primitives (such as some of the new 8-Gb devices have problems with the Idle/Idle sequence at 8 Gb. 8-Gb switches, HBAs, and smaller mid-range 8- . Use the portCfgShow command to display user-configured fill-word settings. The execution - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 35
to ARBFF-ARBFF: switch:admin> portcfgfillword 2/3, 1 See also the portCfgShow command in the Fabric OS Command Reference Manual. • Behavior: implementation. The new portCfgFillWord command enables the user to configure the ARB configuration. • Existing HP StorageWorks Fabric OS 6.3.0a release notes 35 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 36
manually changed to arb(ff) [mode 1], then they remain at arb(ff). Can be changed by the user. Mode: 0-IDLE for Link Init, IDLE for fill word 1-ARB(FF) for Link Init, ARB(FF) for fill word (NOTE: not supported with XP storage arrays) 16.1.2x was not supported on EVA4400 embedded switch module - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 37
Reports > Fabric summary Summary report FCIP tunnel configuration Port Admin Module > GigE tab Configure > FCIP tunnel Viewing FCIP tunnels is still supported in Web Tools 6.1.1, but New, Edit Config, and Delete are available only in DCFM. HP StorageWorks Fabric OS 6.3.0a release notes 37 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 38
the LUN from clear-text to encrypted. • An exception to this LUN configuration process: If the LUN was previously encrypted by the HP Encryption Switch or HP Encryption Blade, the LUN can be added to the CTC with the -encrypt and -lunstate ="encrypted" options. • LUN configurations must be committed - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 39
user changes the LUN's settings during manual the HP Encryption Switch or HP errors will occur, such as key vault not responding and ultimately key archival and retrieval problems. • The HTTP server should be listening to port 9443. SKM is supported only when configured to port 9443. HP StorageWorks - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 40
in QoS Zones. • HP encryption devices can be configured for either disk or tape operation. The ability to configure multiple Crypto-Target Containers defining different media types on a single encryption engine (Encryption SAN Switch or Encryption FC blade) is not supported. Encryption FC blades can - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 41
Key Vaults. Two-way certificate exchange is supported. See the Encryption Admin Guide for configuration information. If you are using dual SKMs on Encryption SAN Switch/Encryption FC blade Encryption Group, these SKM :d5:69:26:29:78:f8:3b:f9:b2:9c:b9 HP StorageWorks Fabric OS 6.3.0a release notes 41 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 42
Configuring the Key Manager in the FIPS Compliance SKM user guide . NOTE: According to FIPS requirements, you cannot ahead of any key sharing between the switch and the SKM" Initial setup of encrypted MSA configuration, for example). • For HP-UX, LUN 0 can appear as 0x0 or 0x400, but both of - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 43
rebooting the HP StorageWorks Encryption SAN Switch that has no longer zoned together, then the user should also remove the associated container switch. Applications that write to a LUN that is being rekeyed may see I/O errors Interopmode 2 default zone is not supported. NPIV devices should be part - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 44
change: Follow the raslog errors FABR-1044 or FABR-1043 displayed by switches in the fabric to identify the offending switch and resolve the FID switch disable. HA cluster member node, HP StorageWorks Encryption SAN Switch faults as a result of slot powercycling its HA cluster peer (HP StorageWorks - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 45
user password is NOT generated as seen from the console log, thereby causing a NO COMM on the VCM. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Power off and Power on the Switch via OA should fix the problem. Swapping HP StorageWorks 32 port 8Gb FC blade with 48 port blade in DC04 SAN - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 46
HP VC switch from Bay 3 and installed in Bay 4 Fixed in Fabric OS 6.3.0 Channel receiving RSCN with missing ports in payload after HPF key Fixed in Fabric OS 6.3.0 on or off. Software verify error occurred during supportsave on HP StorageWorks Fixed in Fabric OS 6.3.0 DC SAN Backbone & DC04 SAN - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 47
and initiators. Encryption SAN Switch went Faulty when starting traffic. Fixed in Fabric OS 6.3.0 SAK/IRNDUP fails with Port Address Name miscompare on CUP Port Fixed in Fabric OS 6.3.0 x'FE' Detected termination of process fabricd:4820 Fixed in Fabric OS 6.3.0 HP StorageWorks Fabric OS 6.3.0a - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 48
has problems with Fixed in Fabric OS 6.3.0 port disable/enable of HBA ports. Switch Kernel panics logingroup database. After rebooting one Encryption SAN Switch of a HAC that has connectivity to lost in the HAC cluster. IPAD-5000 messages will error code "105" showing up on most platforms in AG - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 49
/ IngrianNAE.properties.template /etc/fabos/skm/ IngrianNAE.properties firmwarecommit Unable to launch Web tools on a DC SAN Director. File SW_v5_8.mib has internal notation that it is Version 5.7. Fixed in Fabric OS 6.3.0 Fixed in Fabric OS 6.3.0 HP StorageWorks Fabric OS 6.3.0a release notes 49 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 50
SAN Switch power cycle. Fixed in Fabric OS 6.3.0 Out of Memory due to switch not timing out in.telnetd processes. Fixed in Fabric OS 6.3.0 Workaround prior to code change: Reboot the switch. Transmitted Rate / Received rates based is frame RD zone. RTWR error when going to translate domain. - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 51
spurious High Temperature CRITICAL errors when not preceeded by warnings. Unable to get F Ports(Trunk Ports) data. Fixed in Fabric OS 6.3.0 On some of 2408 FCoE Converged Network switches, DIAGPOST is Fixed in Fabric OS 6.3.0 failing due to loss of sync. HP StorageWorks Fabric OS 6.3.0a release - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 52
to support a user to provide valid input. High Availability : User is able to change the "desired distance" for long distance "L0".User configdownload problems. errors on disabled ports. Fixed in Fabric OS 6.3.0 Fixed in Fabric OS 6.3.0 Fixed in Fabric OS 6.3.0 Switch 4Gb SAN switch for HP c-Class - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 53
Admin window. Confusing error message when copying to code change: Use CLI to map user defined priority group to a CoS. 8/8 use is enabled base logical switch in switchshow shows switch runs out of memory when connected with EoS switches. Fixed in Fabric OS 6.3.0 HP StorageWorks Fabric OS 6.3. - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 54
traverses through FOS 6.2.x. Fixed in Fabric OS 6.3.0 2408 FCoE CN Switch should be able to set enable password. Fixed in Fabric OS 6.3.0 When Quality of Service (QoS) is enabled by default / not utilized, performance of the SAN drops. Disable QoS by default on 4Gb platforms, 8Gb long-distance - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 55
do not support en- Fixed in Fabric OS 6.3.0 crypted LUNs >2TB. Switch Admin: Proper error message should pop up when disabling of FCoE in a VLAN fails. Fixed in Fabric OS 6.3.0 Workaround prior to code change: View the switch events to determine the reason for failure. HP StorageWorks Fabric OS - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 56
Use firmwaredownload -s and then do a manual reboot. 2. Need to power cycle the switch. The switch functions properly after power cycle with normal don't have GUI capability to change SNMP read community configuration. 8/80 SAN Switch: Removing any power supply FRU causes fans to speed up for a - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 57
SAN Director: configdownload: simple upload/download (switch enabled) complaining about FID 128 and will not download with Fixed in Fabric OS 6.3.0 switch enabled. Switch Admin: CEE: NPE is shown in error message when user in Fabric OS 6.3.0 HP StorageWorks Fabric OS 6.3.0a release notes 57 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 58
Web Tools on a DC04 SAN Dir- Fixed in Fabric OS 6.3.0 ector with a 48 port blade. Node descriptors are not shown for M-EOS switch in DCFM when using Fixed in Fabric OS 6.3.0 FOS switch as the seed switch. Get error CHASSIS, ERROR, SYS, FPGA error, DECRYPT_DECOMPRESS_FAIL : Cmd 0x932b6000, Myxid - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 59
40 SAN Switch. Fixed in Fabric OS 6.3.0 Fabric watch: (java.lang.illegalArgumentException:Invalid logid) error SAN Director. Cryptocfg show transshow when issued without any outstanding transactions displayed Operation "failed" with an incorrect cause. Fixed in Fabric OS 6.3.0 HP StorageWorks - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 60
verify on remote switches when changes are problem by using zone --add to modify the attributes again after the save. Can also delete and recreate TI zone. Specific call to CEE library results in gradual memory leak. Fixed in Fabric OS 6.3.0 Getting ms_ficon errors on console of core DC SAN - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 61
Fixed in Fabric OS 6.3.0 Nsinfo.htm returns NPIV info as Physical if non-VF switch is connected Fixed in Fabric OS 6.3.0 to VF enabled platform. CP experienced a kenel panic "Oops: kernel access of bad area, sig: Fixed in Fabric OS 6.3.0 11 [#1]". HP StorageWorks Fabric OS 6.3.0a release notes 61 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 62
OS 6.3.0 Appropriate message is not shown in the message box, when the "Details" button in the "Service" tab of "HA" window is clicked. Fixed in Fabric OS 6.3.0 High Availability: The error message thrown is not relevant or meaningful, when the values for E_D_TOV and R_D_TOV in the "Configure - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 63
that does not support auto mode. SAN Switch for c-Class BladeSystem puts out frequent warning messsages (HIL-1505) that the temperature is above the threshold. Fixed in Fabric OS 6.3.0 IROUNDUP failure when channel running local to DC04 SAN Director Fixed in Fabric OS 6.3.0 CUP. HP StorageWorks - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 64
incorrect. Fixed in Fabric OS 6.3.0 RTWR max retries exhausted on DC04 SAN Director after stress test Fixed in Fabric OS 6.3.0 with POST enabled. OS 6.3.0 If user selects authentication type as "all", in interop modes the default authentication type is still FCAP between FOS switches. Fixed in - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 65
turns faulty 21 after firmwaredownload and reboot of DC SAN Director. Fixed in Fabric OS 6.3.0 Workaround prior to user can activate only 2047 Zones per Zone Set. Fixed in Fabric OS 6.3.0 Event for change in IDID state on neighboring switch not HP StorageWorks Fabric OS 6.3.0a release notes 65 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 66
Console Message is seen on all FOS Switches in Fabric during Configupload on Single FOS Switch in a Interopmode 2 fabric. Fixed in Fabric OS 6.3.0 Block user from configuring QoS on 6-port 10Gb ISL blade. Fixed in Fabric OS 6.3.0 Inappropriate error message from configuredownload in VF mode and - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 67
error message. IP monitor shows number of SCSI frames after deleting a SCSI filter monitor and adding IP monitor on the same port. Onboard Administrator used to manage 8Gb SAN Switch 6.3.0 = 115, user mode" and termination better support snmp services HP StorageWorks Fabric OS 6.3.0a release notes 67 - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 68
even the (container Fixed in Fabric OS 6.3.0 owner) switch is still disabled. Error message may be seen on console under heavy utilization of or when polling a switch that had its password changed multiple times. Disable SMI agents. sysshutdown on 8Gb SAN Switch for HP BladeSystem c-Class may - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 69
done on a trunked EX_Port with HP StorageWorks 1606 Extension Switch or Multi-protocol Extension Blade. Fixed in Fabric OS 6.3.0a Zoning fails with Transaction Commit failed. Reason code 2 (26) - Aca was rejected: Remote Switch Busy, Retry in a few seconds error when E_Port to neighboring Mi10k is - HP StorageWorks 1606 | HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 70
0s 0.00 0.00 0 0/0 0). With 1606 Extension SAN Switch or Multi-protocol Extension Blade, FCIP configuration cannot be restored to default setting by using configdefault, even after chassis reboot. Fixed in Fabric OS 6.3.0a HP StorageWorks Encryption SAN Switch or encryption blade drops frames
HP StorageWorks Fabric OS 6.3.0a
release notes
Part number: 5697-0359
Third edition: March 2010