HP StorageWorks 1606 HP StorageWorks Fabric OS 6.3.0a release notes (5697-0359 - Page 8
Included licensed software - extension san switch specifications
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Works Encryption SAN Switch or on all HP StorageWorks DC Switch Encryption blades installed in the DC SAN Backbone Director/DC04 SAN Director chassis. • Server Application Optimization license (introduced with Fabric OS 6.2)-When deployed with Brocade HBAs, optimizes overall application performance for physical servers and virtual machines by extending virtual channels to the server infrastructure. Application-specific traffic flows can be configured, prioritized, and optimized throughout the data center infrastructure. • 1606 Extension SAN Switch Port Upgrade-This new license allows a 1606 Extension SAN Switch to enable 16 FC ports (instead of the base 4 ports) and 6 GbE ports (instead of the base 2 ports). This license is also required to enable additional FCIP tunnels and advanced capabilities, such as tape read/write pipelining. A 1606 Extension SAN Switch must have the Port Upgrade license installed to add FICON Management Server (CUP) or Advanced Accelerator for FICON. • Advanced Extension-This new license enables two advanced extension features: FCIP Trunking and Adaptive Rate Limiting (ARL). The FCIP Trunking feature allows multiple IP source and destination address pairs (defined as FCIP circuits) via multiple 1-GbE or 10-GbE interfaces to provide a high-bandwidth FCIP tunnel and failover resiliency. Each FCIP circuit also supports four QoS classes (Class-F, Hi, Medium, and Low Priority), each as a TCP connection. The ARL feature provides a minimum bandwidth guarantee for each tunnel, with full utilization of the available network bandwidth without impacting throughput performance under high traffic load. This license is available on the 1606 Extension SAN Switch and DC SAN Backbone Director/DC04 SAN Director for the DC SAN Director Multi-protocol Extension Blade on an individual slot basis. • 10-GbE FCIP-This new license enables the two 10-GbE ports on the DC SAN Director Multi-protocol Extension Blade. With this license, two additional operating modes (in addition to 10 1-GbE ports mode) can be selected: • 10 1-GbE ports and 1 10-GbE port • 2 10-GbE ports This license is available on the DC SAN Backbone Director/DC04 SAN Director for the DC SAN Director Multi-protocol Extension Blade on an individual slot basis. Included licensed software • Enhanced Group Management-This license is included with all HP 8-Gb switches. Enhanced Group Management enables full management of the device in a data center fabric, with increased element management functionality and management task aggregation throughout the environment. This license is used in conjunction with the DCFM application software. • 2408 FCoE Converged Network Switch FC Ports on Demand-This new license enables all eight FC ports on the 2408 FCoE Converged Network Switch. IMPORTANT: Most 2408 FCoE Converged Network Switch units shipped with Fabric OS 6.1.2_cee1 did not include this license and must have it installed before upgrading to Fabric OS 6.3.0. Failure to do so will result in the disabling of FC ports after the upgrade. Contact HP Support to obtain this license key if your 2408 switch does not already have it installed. • FCoE-This license enables Fibre Channel over Ethernet (FCoE) functionality on the 2408 FCoE Converged Network Switch. Without the FCoE license, the 2408 FCoE Converged Network Switch is a pure Layer 2 Ethernet switch and will not support FCoE bridging or FCoE Forwarding (FCF) capabilities. 8