HP StorageWorks 2/128 Brocade Fabric Manager Administrator's Guide (53-1000019 - Page 326
Changing Secure Communication Settings (HTTP or HTTPS
View all HP StorageWorks 2/128 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
24 Changing Secure Communication Settings (HTTP or HTTPS) Figure 24-7 Server Management Console, BannerMessage Tab To create or edit the login banner 1. Launch the Server Management Console. 2. Click the BannerMessage tab. 3. Type a new banner message or edit the existing message. To disable the banner message, delete the existing message (set the message to a zero-length string). 4. Click Submit. Changing Secure Communication Settings (HTTP or HTTPS) Using the Security tab of the Server Management Console, you can change the configuration settings to connect to and communicate with switches using HTTP or using HTTP over SSL (HTTPS). The configuration setting applies to the entire Fabric Manager server and not to selected switches. By default, Fabric Manager connects to all switches using HTTP. If you select HTTPS, then all southbound (server-to-switch) HTTP-based operations initiated by the server is secured by connecting to switches using HTTPS. It is strongly recommended that you select HTTPS only if your SAN meets the following requirements: • All switches in the SAN must be capable of supporting HTTPS. • All switches must have a valid SSL certificate. 24-8 Fabric Manager Administrator's Guide Publication Number: 53-1000196-01-HP