HP StorageWorks 2/140 fw 05.01.00 and sw 07.01.00 ha-fabric manager release no - Page 13
Reinstalling Feature Licenses, Known Issues, Some IP Addresses must be Avoided
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Known Issues Reinstalling Feature Licenses Feature Licenses (or keys) must be reinstalled after performing a factory reset on a director or edge switch to regain use of the licensed features (e.g., SANtegrity Binding). Known Issues This section describes the known issues related to HAFM software. Some IP Addresses must be Avoided When you select IP addresses for edge switches and directors, and also if you select a static IP address for the HAFM server, do not use IP addresses in the following range: ■ 192.168.0.0 through 192.168.0.255-This subnet is used internally to the HAFM server. Using an IP address in this range causes the call-home feature to function incorrectly. Show Routes "Select a Source Node" Panel may be Blank If you first logon to HAFM and immediately go to Fabric View and click Topology View > Show Routes, the Select a Source Node panel may be blank. Workaround Going to a different view first, e.g., Product View or Hardware View for a director or edge switch, will prevent this from occurring. Director and Edge Switch may be Displayed With WWN even if Display Option "Product Name" is Selected In the Fabric View, the directors and edge switches may have their WWN displayed as identifier even if Product Name is selected. Workaround Changing the Display Option to another setting and back to Product Name will cause the Product Name of directors and edge switches to display correctly. HA-Fabric Manager Release Notes 13
![](/manual_guide/products/hewlettpackard-316095b21-fw-050100-sw-070100-hafabric-manager-release-notes-b63dd5a/13.png)