HP StorageWorks 2/140 fw 05.01.00 and sw 07.01.00 ha-fabric manager release no - Page 14

Known Issues "Port Properties" Option may be Unavailable in Node List View If you switch from Hardware View to Node List View, and choose the Product menu, the Port Properties option may not be available. Workaround You must first select a line for a port in the Node List for the Port Properties option to be available, no port is selected by default. Alternatively, Port Properties may be viewed by right-clicking the line for a port in the Node List and choosing Port Properties, or from other views like Hardware View or Port List View. Port Diagnostics on All Ports is not Available When All Ports of an Edge Switch are not Installed and Enabled The Edge Switch 2/24 and Edge Switch 2/32 basic units have 8- and 16-ports installed, respectively. The remaining ports can be enabled by purchasing additional ports and licenses to enable them, in 8-port increments. If all of the ports are not installed, Port Diagnostics must be run on one port at a time, and the option to run diagnostics on all ports is not available. Open Systems Management Server Under the HAFM Product Manager > Hardware View menus, the Configure > Management Server. . .menu option will result in a pop-up dialog. This dialog states "This feature has not been installed. Please contact your sales representative." This feature is not currently available. Multiple FC HBA Ports in Separate Zones Multiple FC HBA ports in the same host should be placed in separate zones, or they might be perceived as potential targets (some HBAs log-in as both host and target). 14 HA-Fabric Manager Release Notes