Home » HP Manuals » Storage Devices » HP StorageWorks 2/140 » Manual Viewer

HP StorageWorks 2/140 FW 05.01.00 and SW 07.02.00 hp StorageWorks HA Fabric Ma - Page 11

Command Line Interface (CLI) Changes, SNMP Changes, Counter Threshold Alerts CTA

View all HP StorageWorks 2/140 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Important Information Command Line Interface (CLI) Changes CLI has been enhanced to provide the following benefits: ■ Access to symbolic name information in the name server database. ■ Counter Threshold Alerts (CTA)-Used to configure limits and alerts for any of the supported port statistics fields. You can configure alerts for individual ports, groups of ports, or various port types, based on user-specified counter value exceeded over a specified time duration. Note: The CTA configuration is cleared upon downgrade to firmware below 05.01.00. SNMP Changes Firmware Version 05.01.00-24 supports the following management information base (MIB) versions on all products: ■ Fabric Element MIB: V1.1 ■ MIB-II MIB: RFC-1213, non-implemented sections are not included ■ FCEOS MIB: V2.0 ■ SNMP Framework MIB: RFC-2271 (1997/09/30) ■ FA MIB: V3.1 HA-Fabric Manager Release Notes 11

Section	Page
HA-Fabric Manager Release Notes	1
About this Document	3
Release Notes Information	4
Intended Audience	5
Other HAFM Documentation	5
CD-ROM Directory Structure	5
HAFM Software Version 07.02.00-09	6
Important Information	7
HAFM and Firmware Version Compatibility	7
Table 1: HAFM and Firmware Compatibility	7
Upgrading to the latest Version of Firmware	8
Considerations for Downgrading the Version of Firmware	9
Open Trunking Feature is Not Available in Current Release	9
Zoning is Disabled by Default	9
Hard Zoning	10
Zoning Change RSCN Control	10
Embedded Web Server (EWS) Changes	10
Command Line Interface (CLI) Changes	11
SNMP Changes	11
Zoning Limitations	12
Table 2: Zoning Parameters Supported Limits	12
Using the Same Firmware	12
Reinstalling Feature Licenses	13
CTP Controls Port Lights	13
Information Displayed on LCD Screen	13
Regulatory Information	14
TELECOMMUNICATIONS NOTICE FOR JAPAN	14
Known Issues	14
HAFM Server LCD Screen Displays Wrong IP Address	14
Some IP Addresses must be Avoided	15
Show Routes “Select a Source Node” Panel may be Blank	15
Workaround	15
Director and Edge Switch may be Displayed With WWN even if Display Option “Product Name” is Selected	15
Workaround	15
“Port Properties” Option may be Unavailable in Node List View	15
Workaround	15
Port Diagnostics on All Ports is not Available When All Ports of an Edge Switch are not Installed and Enabled	16
Open Systems Management Server	16
Support for Speed Auto-Negotiate	16
Workaround	16
Losing LAN Connection to the HAFM Server When Logged into the HAFM Application	17
Workaround	17
Effect of No LAN Connection to HAFM Server During Boot Up	17
Workaround	17
Issue Concerning HAFM Remote Client Access to the HAFM Server with Dual LAN Configuration	18