HP StorageWorks 2/140 FW 05.01.00 and SW 07.02.00 hp StorageWorks HA Fabric Ma - Page 15

Known Issues Some IP Addresses must be Avoided When you select IP addresses for edge switches and directors, and also if you select a static IP address for the HAFM server, do not use IP addresses in the following range: ■ 192.168.0.0 through 192.168.0.255-This subnet is used internally to the HAFM server. Using an IP address in this range causes the call-home feature to function incorrectly. Show Routes "Select a Source Node" Panel may be Blank If you first logon to HAFM and immediately go to Fabric View and click Fabrics > Show Route, the Select a Source Node panel may be blank. Workaround Going to a different view first, e.g., Product View or Hardware View for a director or edge switch, will prevent this from occurring. Director and Edge Switch may be Displayed With WWN even if Display Option "Product Name" is Selected In the Fabric View, the directors and edge switches may have their WWN displayed as identifier even if Product Name is selected. Workaround Changing the Display Option to another setting and back to Product Name will cause the Product Name of directors and edge switches to display correctly. "Port Properties" Option may be Unavailable in Node List View If you switch from Hardware View to Node List View, and choose the Product menu, the Port Properties option may not be available. Workaround You must first select a line for a port in the Node List for the Port Properties option to be available, no port is selected by default. Alternatively, Port Properties may be viewed by right-clicking the line for a port in the Node List and choosing Port Properties, or from other views like Hardware View or Port List View. HA-Fabric Manager Release Notes 15