HP StorageWorks 2/140 FW 05.01.00 and SW 07.02.00 hp StorageWorks HA Fabric Ma - Page 14

Regulatory Information Note: After you enter the IP address and the server reboots, the LCD screen remains blank for a few minutes during boot up. This is normal. After a few minutes the screen displays "Welcome". Regulatory Information The following regulatory information was erroneously omitted from the HP StorageWorks HA-Fabric Manager Server Installation Guide. TELECOMMUNICATIONS NOTICE FOR JAPAN The modem supplied with this equipment, part number MT5634ZPX-PCI, is approved for use in Japan. The Japanese approval number is A00-1160JP. Known Issues This section describes the known issues related to the 1U HAFM server and the HAFM software. HAFM Server LCD Screen Displays Wrong IP Address During configuration of HAFM Server networking, the following items must be taken into consideration: ■ When setting the IP address using the Liquid Crystal Display (LCD) console display on the server, the IP address shown in the window is for the other network interface. (For example, if you are changing the LAN 1 address, the LAN 2 address is shown in the display window). Please input the full address that is desired for the chosen interface-this operation implements the interface that you have targeted with the address in the set window. ■ If the preset IP addresses are changed before the HAFM server is connected to the Ethernet network, the address changes are not shown on the LCD console and do not take effect until after the HAFM server is rebooted. 14 HA-Fabric Manager Release Notes