HP StorageWorks 2/140 FW 05.01.00 and SW 07.02.00 hp StorageWorks HA Fabric Ma - Page 19
Workaround, is the IP address assigned to one of the Ethernet LAN
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Known Issues Workaround There are a two ways to assure the pubic and private designations of the LANs. ■ If you use a private LAN IP address, i.e. 10.x.x.x, this causes this LAN to be designated as the private LAN. You must also have the public LAN connection active when the HAFM sever is booting up, or else the HAFM application will interpret this as a single LAN connection configuration, and the 10.x.x.x LAN will be designated as the LAN for remote client sessions. ■ You can configure a specified Ethernet interface on the HAFM server to be the public LAN (to listen for remote client connections). To configure this feature, you must manually edit a file on the HAFM server to explicitly specify which IP address HAFM should use as the public LAN. Perform the following to configure an Ethernet interface: a. Open the config.properties file in directory C:\Program Files\HAFM\, and add the following line: ServerRmiIpAddress=x.x.x.x where x.x.x.x is the IP address assigned to one of the Ethernet LAN adapters which is to be used as the public LAN. This entry is case sensitive and must be made exactly as shown. Once this line has been added, the HAFM server must be rebooted. Note: This does not impact the Fibre Channel operations of any edge switch or director. Only monitoring switch operations, logging events, and implementing configuration changes are interrupted. If the public LAN IP address of the HAFM server is ever changed, this file must be edited again to reflect the new IP address. HA-Fabric Manager Release Notes 19
![](/manual_guide/products/hewlettpackard-316095b21-fw-050100-sw-070200-hp-storageworks-ha-fabric-manager-release-notes-2f32bdc/19.png)