HP StorageWorks 2/140 FW 05.02.00 and SW 07.01.00 and 07.02.00 HP StorageWorks - Page 14

Important Information c. Right-click the active CTP card and choose Switchover from the pop-up menu. Note: The director will lose its Ethernet connection for a short period during the switchover process. d. On the Switchover CTP dialog box, choose Switchover to switch operation to the backup card. When switchover occurs, the green LED illuminates on the backup CTP card to indicate that it is now the active card. 5. Upgrade the Firmware to Version 05.02.00-13 on each director using the Send option on the Firmware Library dialog box. HAFM Upgrade Required for Firmware Version 05.02.00-13 If you are using HAFM to manage the Director 2/140, Director 2/64, Edge Switch 2/32, Edge Switch 2/24, and/or Edge Switch 2/16, and they are running firmware Version 05.02.00-13, you need to upgrade HAFM to Version 07.01.00-09 (minimum). For more information on upgrading software versions, refer to the HP StorageWorks HA-Fabric Manager User Guide. The features of this software version are detailed in the accompanying manuals listed in section "Other Director Documentation". Open Trunking Feature is Not Available in Current Release The Open Trunking feature is not available in Firmware Version 05.02.00-13. Open Trunking feature will be available in a future release. Zoning is Disabled by Default The default zone on the Director 2/64 and the Director 2/140 is disabled by default. Zoning must be configured in order for any devices connected to the director to communicate. 14 Director Release Notes