HP StorageWorks 2/16N Brocade Access Gateway Administrator's Guide - Supportin - Page 40
Enabling the failback policy, To enable failback
View all HP StorageWorks 2/16N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4 Managing the failover and failback policies Enabling the failback policy A switch in Access Gateway mode supports automatic F_Port failback to N_Ports when that port comes back online. By default the failback policy is enabled. When an N_Port with an enabled failback policy comes back online, the F_Ports that were originally mapped to it are automatically rerouted back to the N_Port. To enable failback 1. Connect and log in to the switch. 2. Enter the ag --failbackshow command with the n_portnumber operand to display the failover setting. switch:admin> ag --failbackshow 13 Failback on N_Port 13 is not supported 3. Enter the ag --failbackenable command with the n_portnumber operand to enable failover. switch:admin> ag --failbackenable 13 Failback policy is enabled for port 133 To disable failback 1. Connect and log in to the switch. 2. Enter the ag --failbackshow command with the n_portnumber operand to display the failover setting. switch:admin> ag --failbackshow 13 Failback on N_Port 13 is supported 3. Enter the ag --failbackdisable command with the n_portnumber operand to disable failover. switch:admin> ag --failbackdisable 13 Failback policy is disabled for port 13 4-8 Access Gateway Administrator's Guide Publication Number: 53-1000430-01