HP StorageWorks 2000fc HP StorageWorks 2312fc and 2324fc Modular Smart Array u - Page 25
Table 3, Parameter, Value
View all HP StorageWorks 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
1. From your network administrator obtain an IP address, subnet mask, and gateway address for controller A and controller B. 2. Use the provided micro-DB9 serial cable to connect controller A to a serial port on a host computer. Your package contents include a micro-DB9-to-DB9 serial cable. If necessary, use a DB9-to-DB25 adapter (not included) for connecting the serial cable to a DB25 serial port on the host computer. 3. Start and configure a terminal emulator, such as HyperTerminal or VT-100, using the display settings in Table 3 and the connection settings in Table 4. .Table 3 Terminal emulator display settings Parameter Terminal emulation mode Font Value VT-100 or ANSI (for color support) Terminal Translations None Columns 80 4. In the terminal emulator, connect to controller A. Table 4 Terminal emulator connection settings Parameter Value Connector COM1 (typically) Baud rate 115,200 Data bits 8 Parity None Stop bits 1 Flow control None 5. Press Enter to display the CLI prompt (#). HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide 25