HP StorageWorks 2000fc HP StorageWorks 2312fc and 2324fc Modular Smart Array u - Page 29
Basic operation, Powering on/powering off, Updating firmware
![]() |
View all HP StorageWorks 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
5 Basic operation Powering on/powering off Before powering on the enclosure for the first time: • Install all hard drives in the enclosure so that the connected host controller can identify and configure them at power-up. • Connect the cables and power cords to the enclosure as explained in the Installation Poster. • Generally when powering up, make sure to power up the enclosures and associated data host in the following order: • Drive enclosures first • Controller enclosure next • Data hosts last (if they are powered down for maintenance purposes) To power on the system: 1. Press the power switches at the back of each drive enclosure to the On position. 2. Press the power switches at the back of the controller enclosure to the On position. To power off the system: 1. Stop all I/O from hosts to the system. 2. Use SMU to shut down both controllers. See the SMU online help or CLI reference guide for information on shutting down controller.s Wait until SMU indicates that processing is complete. 3. Press the power switches at the back of the controller enclosure to the Off position. 4. Press the power switches at the back of each drive enclosure to the Off position. Updating firmware After installing the hardware and powering up the enclosure for the first time, be sure to verify that the controllers and drive enclosures have the latest firmware. SMU enables you to view the software, hardware, and other version information for each controller and the enclosures. To view controller version information, in the Configuration View panel, right-click the system, select View > Overview, and select the Versions button in the System Overview Table. To view drive enclosure information, in the Configuration View panel, right-click the enclosure and select View > Overview. The enclosure firmware is listed as EMP A Revision and EMP B Revision. For software and firmware updates, including language packages and firmware update instructions, go to http://www.hp.com/go/msa. Select MSA SAN Arrays, select your product, and go to Support. Selecting an appropriate time to perform the online upgrade To ensure the success of an online upgrade, selecting the appropriate time is essential. Selecting a period of low I/O activity will ensure the upgrade completes as quickly as possible, and will avoid disruptions to host and applications due to timeouts. Attempting to upgrade a storage system that is in the middle of processing a large I/O intensive batch job will likely cause hosts to lose connectivity with the storage system. Consequently, finding an appropriate time for the upgrade is very important. For software and firmware updates, go to http://www.hp.com/go/msa. Select MSA SAN Arrays, select your product, and go to Support. For detailed steps on updating the firmware, see the reference guide or the CLI reference guide. For information on logging into SMU, see Configuring a system for the first time. HP StorageWorks 2312fc and 2324fc Modular Smart Array user guide 29
![](/manual_guide/products/hewlettpackard-storageworks-2000fc-hp-storageworks-2312fc-2324fc-modular-smart-array-user-guide-500910001-2009-876b73f/29.png)