HP StorageWorks 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 90
Setting Up the Hardware Event Monitor, Aliasing Devices (HP-Qualified Only), Part Number T1001-96006.
View all HP StorageWorks 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Setting Up the Hardware Event Monitor Separate monitors watch over the disks and the disk system. You need to install and configure the Disk Monitor (disk_em) and the High Availability Storage System Monitor (dm_ses_enclosure) for complete event notification. To install and configure the required monitors, refer to the EMS Hardware Monitors User's Guide, which is included in Adobe Acrobat format on IPR Support Media. You can download a copy of Acrobat Reader without charge from http://www.adobe.com/prodindex/acrobat/readstep.html. For specific information about setting up hardware event monitoring using HP CommandView SDM, see the HP Commandview SDM Disk System Installation and User Guide, Version 1.04 (Part Number T1001-96006). For specific information about setting up hardware event monitoring using HP TopTools 5.5, see the HP TopTools 5.5 User Guide, Version 1.0 on the following URL: http://www.hp.com/toptools/doc/manuals.html. Aliasing Devices (HP-Qualified Only) Using host-based software, you can "label" each disk system with any information that would be useful for the site. You might use this feature to assign an inventory number or to indicate the location of the product. The maximum length of the annotation is 256 characters. It appears in EMS event messages. For specific information about annotating devices, see the HP Commandview SDM Disk System Installation and User Guide. For specific information about annotating devices using HP TopTools 5.5, see the HP TopTools 5.5 User Guide. 90 Configuration