HP StorageWorks 2300 HP StorageWorks Disk System 2300 User's Guide(This manual - Page 91
Updating Firmware (HP-Qualified Only), Command View SDM
View all HP StorageWorks 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Configuration Updating Firmware (HP-Qualified Only) Obtain the latest disk or BCC firmware release from the support site before traveling to the customer site. For specific information about updating firmware, see the HP CommandView SDM Disk System Installation and User Guide, Version 1.04. For specific information about updating firmware using HP TopTools 5.5, see the HP TopTools 5.5 User Guide. Command View SDM This configuration tool is supported on three different operating systems: ■ HP-UX ■ Windows ■ Linux Redhat Installation varies depending on the chosen operating system. After installation, Command View SDM operation is virtually identical for all three operating systems. The Command View SDM software provides both server and client applications. If you are operating as a client (on a host not directly connected to the array), you must be assigned access permission to the array from the server (host directly connected to the array) to access the array for Command View SDM management. Note Examples in this section occasionally identify a path. When only one path is shown, either Windows path separators "\" or UNIX/Linux path separators "/" will be used. If you use an example, use the path separators appropriate for your operating system. Configuration 91