HP StorageWorks 4/256 Brocade Fabric OS Message Reference - Supporting Fabric - Page 217
FW-1120, FW-1121, FW-1122
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
27 FW-1120 FW-1120 Message , [FW-1120], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of fabric reconfigurations has changed from a value outside of the acceptable range to a value within the acceptable range. The following occurrences can cause a fabric reconfiguration: • Two switches with the same domain ID have connected to one another. • Two fabrics have joined. • An E_Port has gone offline. • A principal link has segmented from the fabric. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1121 Message , [FW-1121], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of domain ID changes has changed. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1122 Message , [FW-1122], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of domain ID changes has fallen below the low boundary. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. A low number of domain ID changes means that the fabric is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO Fabric OS Message Reference 169 53-1000437-01