HP StorageWorks 4/256 Brocade Fabric OS Message Reference - Supporting Fabric - Page 58
Audit Message Field Description, Error Description
View all HP StorageWorks 4/256 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
1 Reading a RAS System Message AUDIT, 2005/12/10-09:54:03, [SEC-1000], WARNING, SECURITY, JohnSmith/root/192.168.132.10/Telnet/CLI, Domain A/JohnsSwitch, , Incorrect password during login attempt. The fields in the error message are described in table below. TABLE 4 Audit Message Field Description Example Variable Name Description AUDIT 2005/12/10-09:54:03 Audit flag Date and Time Stamp Identifies the message as an Audit message. The system time (UTC) when the message was generated on the switch. The RASLog subsystem will support an internationalized timestamp format base on the "LOCAL" setting. [SEC-1000] WARNING SECURITY JohnSmith root 192.168.132.10 Telnet CLI Domain A switchname , , Message Module and Message Number Displays the message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual. Note that not all message numbers are used; there can be gaps in the numeric message sequence. Severity Level Displays the severity of the error in alpha format: 1 = Critical 2 = Error 3 = Warning 4 = Info Event Class Identifies the event class as one of the following: Zone Security Configuration Firmware Fabric User ID Identifies the user ID. Role Identifies the role of the user ID. IP Address Identifies the IP address. Interface Identifies the interface being used. Application Name Identifies the application name being used on the interface. Admin Domain Identifies the Admin Domain, if there is one. Switch name or chassis name, depending on the action; for example, HA messages typically show the chassis name and login failures show the logical switch name. This field displays the defined switch name or the chassis name of the switch. This value is truncated if it is over 16 characters in length. Run either the chassisName command to name the chassis or the switchName command to rename the logical switch. Null Reserved for future use. Slot 7 ejector not closed Error Description This field displays a text string explaining the error encountered and providing parameters supplied by the software at runtime. 10 Fabric OS Message Reference 53-1000437-01