HP StorageWorks 4/64 HP StorageWorks DC and DC04 SAN Backbone Director Switche - Page 195
To record critical DC04 SAN Director and SAN information
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Output from supportshow command Location of spptshow.txt file: Notes regarding supportshow output: Information about the new chassis New Factory Serial Num: New Serial Num (if available): To record critical DC04 SAN Director and SAN information: 1. Open a Telnet session and log in to the DC04 SAN Director as admin. The default password is password. Enable the logging function on your Telnet or serial console connection. 2. Back up the current configuration. Type configUpload, then enter the requested information at the prompts. This command uploads the DC04 SAN Director configuration to the customer-defined FTP server, making it available for downloading. For more information about this command, refer to the Fabric OS Command Reference. rsl8-st03-dcx-1:admin> configupload Protocol (scp or ftp) [ftp]: ftp Server Name or IP Address [host]: 123.123.123.123 User Name [user]: Admin24 File Name [config.txt]: config-switch0.txt Password: Upload complete rsl8-st03-dcx-1:admin> HP StorageWorks DC and DC04 SAN Backbone Director Switches 195