HP StorageWorks 8/24 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 207
zonecreate broadcast, 1,2; 2,33; 2,34, cfgsave
View all HP StorageWorks 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
The values represent the following: zonename The name of the zone to be created. member A member or list of members to be added to the zone. A zone member can be specified by one or more of the following methods: • A domain,port pair. • Device node or device port WWN • Zone alias name To create a broadcast zone, use the reserved name "broadcast". 3. Enter the cfgSave command to save the change to the defined configuration. switch:admin> zonecreate "greenzone", "2,32; 2,33; 2,34; 4,4" switch:admin> zonecreate "redzone", "21:00:00:20:37:0c:66:23; 4,3" switch:admin> zonecreate "broadcast", "1,2; 2,33; 2,34" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y To add devices (members) to a zone: 1. Connect to the switch and log in as admin. 2. Enter the zoneAdd command, using the following syntax: zoneadd "zonename", "member[; member...]" The values represent the following: zonename The name of the zone. member A member or list of members to be added to the zone. A zone member can be specified by one or more of the following methods: • A domain,port pair. • Device node or device port WWN • Zone alias name 3. Enter the cfgSave command to save the change to the defined configuration. switch:admin> zoneadd "greenzone", "1,2" switch:admin> zoneadd "redzone", "21:00:00:20:37:0c:72:51" switch:admin> zoneadd "broadcast", "1,3" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y Fabric OS 6.1.x administrator guide 207